Striping is the final touch that adds a tremendous amount of appeal and controls the parking and traffic flow.

There is one thing for sure. You can take a perfect paving or sealcoating project and completely ruin the appearance of the whole job with a sloppy striping job. Straight, crisp, clean lines and stencils are a must.
TR Line Striping & Sealcoating chalks all lines on new layout striping to insure perfectly straight lines. We use only high quality tough wearing Sherwin-Williams Hotline traffic paint unless otherwise specified.

 
Striping Specs:

• Striping can be done approximately 12-24 hours after the sealer has dried. Time will vary depending on temperature.
• Sherwin-Williams Hotline Traffic Marking Paint will be the paint used unless otherwise specified in the proposal. Sherwin-Williams Paints meets or exceed all federal and state highway paint specifications.
• All lines will be applied with a Graco Line Laser Airless striping machine. This striper applies paint at the approximate rate of 300-linear feet per gallon as opposed to an air striper which applies paint at the rate of about 650 linear feet per gallon.
• All lines will be 4 inches wide. They will be straight and uniform. All stencils will be clear and well defined.